The Parts That Are Easily Damaged By The Automatic Lock Screw Machine

Under normal circumstances, the areas that are most easily damaged by automatic screwdrivers are: electric screwdrivers, batch rods, vacuum suction cups, and bronchi, which must be replaced several times over a period of time. The damage problem of electric screwdrivers The automatic screwing machine belongs to the non-standard automatic technology assembly machinery and equipment. Compared with the quality of the lock and the standard machinery and equipment, it must be much higher than the traditional quality rules. Usually, it is not easy. Product quality problems occur.

However, the production line equipment is all expensive, especially in the case of an automatic screw machine. Its operation efficiency is very high. At the same time, the consumption of some components is relatively faster. When some parts have problems, From time to time, there will be problems with the quality of products that will be locked.

The damage problem of the batch rod In all kinds of spare parts, the batch rod touches the screw to stop the locking operation. Therefore, the batch rod is damaged much faster than other components. When the batch rod is damaged to the necessary extent , it is necessary to replace a new batch mouth to avoid slippery teeth, missing teeth, and the number one will affect the quality and appearance.

The batch rods of the fully automatic screwdrivers developed by the product are all selected from well-known brand spare parts. Compared with the general batch rods, the service life is longer. Perhaps people will be equipped with the same type of standard when customizing the automatic screwdrivers for customers. And high-quality batch rods and other easy-to-expend spare parts, to ensure that customers can produce high-quality products with high-efficiency consumption.

The bronchus needs to be checked frequently whether the bronchus is used for feeding or air blowing inspection. It all depends on whether the feeding method of the active screw machine is the air blowing method or the air suction method, but the bronchus will also have a service period. , blockage, etc., will endanger the normal operation of the automatic screw machine, so it takes a period of time to disassemble and replace it many times.