Analyze The Different Uses Of The Automatic Locking Screw Machine

The automatic locking screw machine is one of the most frequently encountered equipment in the screw industry, but when the relevant staff is conceiving the structure of the screw machine, which systems and positions are related parts and accessories used? After composing the machine, you can operate and deal with related processes well.

I believe everyone should know that in the process of using many machines and equipment, some small defects will inevitably appear, and the automatic locking screw machine is no exception. In some cases, when using the automatic locking screw machine, there may be more common problems such as the inability to open the machine, the screw cannot be sucked, the screw rises, and the leak lock.

So when the automatic locking screw machine presents these common problems, how to deal with it? Common problem 1: The automatic locking screw machine cannot be turned on. Solution 1: Check the tightness of the power connector, whether the 220AC can supply power normally, the power switch may be forgotten, whether the power cord is damaged, and whether the fuse is blown. Common problem 2: Automatic locking screw machine screw lock sliding teeth.

Solution 2: Check whether the torque of the electric screwdriver can fit within the torque range, use a torque meter to re-check the torque of the electric screwdriver, and check whether the product screws are standard. Common problem 3: The screw sucks crookedly, can't suck the screw (draw-type automatic locking screw machine).