Screw Machines Are Widely Used In The Electronics Industry

The screw machine is composed of a feeding system and a locking system. The feeding part is also called a screw arranging machine or a screw feeding machine. It is a relatively simple type of screw arranged in a row to improve work efficiency. Active equipment is widely used in the electronics industry. The size range of a machine that can be applied to a variety of screws and screws now has a certain adjustment space. It ranges from M1 to M8, and with regard to special screws, there is room for maneuverability and is designed independently.

Both short screws and screws with washers can be used universally! Convenient trajectory adjustment! The trajectory of the screw machine can be extracted and adjusted! Simple and easy to understand, easy to operate! The current screw machines are now very mature, so the phenomenon of jamming screw machines has rarely happened again. If there is a phenomenon of missing screws, they will take the initiative to report to the police, so the phenomenon of workers doing useless work at work is reduced.

The current screw machine equipment has independent control of the feeding system and the oscillation drive, and can freely set the ideal delay stop time. When an abnormal situation occurs, the screw machine will activate the malfunction alarm function! The operation is the same as other screw machines!

When removing the screw, just put the bit into the bit guide, and then pull the screw out towards the front. Compared with the traditional screw plate, each screw can save 1.4 seconds and the productivity can reach 6 times!

Simple operation, even the layman can learn the operation method immediately. It is not necessary to align the screws, just put the screws into the feeding room in batches, and it can be widely used in various electronic industries, automobiles, televisions, air conditioners and other industries that require screws.