Hand-Held Lock Screw Machine Operation Precautions

The operation of the handheld automatic screwing machine is one step more than the multi-axis automatic screwing machine. The multi-axis type is completely equipped with a machine to lock the product screws, and the operator only needs to hold the product and start the button. The operation is relatively simple , The hand-held automatic locking screw machine also has the functions of automatic feeding, automatic material selection, lack of material alarm, etc., but in production, the key operations are still performed manually. If the operation is wrong, it may cause material jams. List some of the work methods that may cause problems as follows:

1. Hold the nail tube: The automatic feeding function of the automatic screw machine is to convey the screws through the nail tube. When working, we only need to hold the batch to ensure that the nail tube is unblocked. Do not hold it together with the nail tube, which will cause the nail tube to deform , Jam the screw.

2. The mouth is not hit to the endThe batch nozzle is not hit to the end, the screw is floating, the sensor does not respond, the next screw cannot be fed normally, the batch nozzle reaches the set torque, the screwdriver automatically stops working, the sensor is sensed, and the material is automatically fed.

The hand-held screw machine is an automated equipment developed in accordance with the habit of manual operation. As long as we operate normally, there will be no material jam. The above are two serious manual errors. As long as normal operation, the screw lock can be completed efficiently and quickly. Pay work.